Comparing Key Benefits
7WF – Advanced 4-Stage Filtration
Your water passes through an advanced, multi-stage purification system designed to remove impurities, protect your health, and enhance the taste.
Stage 1 — Sediment Filter (PP100)
Removes:
• sand, rust, silt and fine particles
• improves clarity and protects the next filters
Stage 2 — Carbon Block Filter (CTO)
Removes:
• chlorine, taste and odour
• pesticides, herbicides, insecticides
• VOCs and industrial solvents
Stage 3 — RO Membrane (600 GPD)
Removes over 1,000 contaminants, including:
• heavy metals
• fluorides
• microplastics
• bacteria and other microscopic particles
Final RO water TDS: around 7.
Stage 4 — Multifunction Mineral Filter
Adds back seven natural minerals essential for the human body.
Final mineralised water TDS: around 55.
3-Stage Traditional Filtration
In a standard filter, water passes through sediment and carbon cartridges that remove sand, rust, chlorine and basic chemical impurities before reaching the tap.
Stage 1 — Sediment Filter
Removes particles up to 5 microns: sand, rust, silt.
Stage 2 — Activated Carbon Block
Reduces:
• chlorine
• organic compounds
• pesticides & herbicides
• VOCs
Stage 3 — GAC Carbon Filter
Further reduces chlorine, pesticides, and some heavy metals.
Balances pH.
Final water TDS: 200–220 (from tap water ~275).
In short
Water flow in 7Waterfilters
Water moves through a carefully designed filtration pathway: first the PP sediment filter, then the CTO carbon block, and finally the RO membrane, which removes up to 1,000 contaminants.
After purification, the water flows into the multifunction mineral filter, where natural minerals are restored.
The system provides two independent outlets — ultra-pure RO water and balanced, mineralised drinking water — dispensed through a tap with a single-drop (RO) and double-drop (mineral) design.
TDS levels are typically around 7 after RO, and approximately 55 after remineralisation.
7-Stone Mineral Restoration
A blend of seven ceramic stones naturally enriches the purified water with essential minerals, improving taste, balance and hydration.
Each filter contains Highest Quality SGS Certified mineral stones:
1. HYDROGEN balls 320 G
2. MPH balls 100 G
3. FIR balls 50 G
4. KDF balls 30 G
5. MAIFAN balls 50 G
6. TOURMALINE balls 50 G
7. Activated Carbon balls 50 G
What is included in package?
1 x Water Filtration System + 24V Power supply + extension adapter + Filter Cap wrench
1 x RO Double Branded Faucet with 2 inlets 1/4” and straight 2 1/4” connectors
1 x RO Membrane Mempro M600 3013JF1
2 x sets of filters
1set=1xPP,1xCTO,1xH2AMC
PE RO Pipes:
- (3/8”) 2.5 meters
- (1/4”) 5 meters
- 90 degree angle outlets 1x(3/8”) 3x(1/4”)
- 1xWater 40mm Drain Waste Water - Pipe Clamp
- 1x Water inlet valve
- 1x Wall mount
Dimensions
Whole system got 43cm x 48cm x 20cm
Will fit perfectly under the sink.
You can mount it permanently or use as free standing.
Product Manual
Manual downloadHow to install step by step
Step 1
Find a place where you wish to install system.
Step 2
Check that you have required tools and you will need:
1. plastic tube cutter or knife
2. 12 mm box spanner or 12 mm spanner for faucet fixing
3. drill
4. drill bits: 10 mm for faucet to sink and 6 mm for drain waste saddle
Step 3
Remove factory blanking plastics and push 90 degree angle outlets until they click
Step 4
Connect 2 pipes to straight 1/4" connectors and push to water faucet inlets
Step 5
Mount water inlet valve and connect to system
Step 6
Connect pipe to Drain Water Clamp
Step 7
Please open water valve and turn power on